Specification of
FANUC ROBOSHOT S-2000i 100BH
[ROBOSHOT Top]
[S-2000i 15B] [S-2000i 30B] [S-2000i 50B]
[S-2000i 100B]
[S-2000i 150B] [S-2000i 250B] [S-2000i 300B] [S-2000i 50BP]
[S-2000i 100BH]
| Item | Unit | ROBOSHOT S-2000i 100BH | |||
|---|---|---|---|---|---|
| Clamping unit | Tonnage | kN | 1000 (100 tonf) | ||
| Maximum and Minimum die height | mm | 450 / 150 | |||
| Clamping stroke | mm | 350 | |||
| Tie bar spacing (HxV) | mm | 460 x 410 | |||
| Platen size (HxV) | mm | 660 x 610 | |||
| Ejector point | point | 5 | |||
| Ejector force | kN | 25 (2.5 tonf) | |||
| Ejector stroke | mm | 100 | |||
| Injection unit | Injection specification | - | Injection speed 1000mm/s | ||
| Screw diameter | mm | 22 | 26 | 28 | |
| Maximum injection volume | cm3 | 29 | 50 | 58 | |
| Maximum injection pressure | MPa | 400 | 380 | 350 | |
| Maximum pack pressure | MPa | 380 | 350 | 300 | |
| Maximum injection speed | mm/s | 1000 | |||
| Maximum screw rotation speed | min-1 | 450 | |||
