Specification of
FANUC ROBOSHOT S-2000i 150B
[ROBOSHOT Top]
[S-2000i 15B] [S-2000i 30B] [S-2000i 50B]
[S-2000i 100B]
[S-2000i 150B] [S-2000i 250B] [S-2000i 300B] [S-2000i 50BP]
[S-2000i 100BH]
| Item | Unit | ROBOSHOT S-2000i 150B | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Clamping unit | Tonnage | kN | 1500 (150 tonf) | |||||||||||||||||
| Maximum and Minimum die height | mm | 490 / 200 | ||||||||||||||||||
| Clamping stroke | mm | 440 | ||||||||||||||||||
| Tie bar spacing (HxV) | mm | 560 x 510 | ||||||||||||||||||
| Platen size (HxV) | mm | 800 x 750 | ||||||||||||||||||
| Ejector point | point | 5 | ||||||||||||||||||
| Ejector force | kN | 35 (3.5 tonf) | ||||||||||||||||||
| Ejector stroke | mm | 150 | ||||||||||||||||||
| Injection unit | Injection specification | - | Injection speed 200mm/s | Injection speed 330mm/s | Small capacity injection | |||||||||||||||
| Screw diameter | mm | 32 | 36 | 40 | 44 | 48 | 52 | 32 | 36 | 40 | 44 | 48 | 52 | 22 | 26 | 28 | 32 | 36 | 40 | |
| Maximum injection volume | cm3 | 121 | 153 | 188 | 268 | 318 | 442 | 121 | 153 | 188 | 268 | 318 | 442 | 29 | 50 | 58 | 103 | 147 | 181 | |
| Maximum injection pressure | MPa | 280 | 280 | 260 | 220 | 190 | 160 | 280 | 280 | 260 | 220 | 190 | 160 | 260 | 260 | 240 | 220 | 190 | 160 | |
| Maximum pack pressure | MPa | 280 | 280 | 260 | 190 | 160 | 130 | 280 | 280 | 260 | 220 | 190 | 160 | 260 | 260 | 220 | 200 | 170 | 140 | |
| Maximum injection speed | mm/s | 200 | 330 | 330 | ||||||||||||||||
| Maximum screw rotation speed | min-1 | 300 | 400 | 450 | ||||||||||||||||
